|LINE-X® Industrial Coatings -
Providing Proven, Cost-Effective Solutions Around
Our proprietary products are
perfect for protecting just about anything that you
care to protect. Each can be used alone or in
conjunction with one another for superior
protection. All systems utilize a two-component,
spray-in-place, 100% solids (no air pollution),
thermoplastic polyurethane and polyurea.
LINE-X products are a fast-cure, multipurpose
series of coatings designed for a wide range of
retail, commercial, and industrial uses. They
exhibit excellent adhesion to most properly prepared
surfaces. With its fast cure time it can be sprayed
vertically and even overhead without running or
dripping. There are no solvents associated with
LINE-X products, which means there are no air
pollutants or harmful environmental contaminates.
LINE-X protective coatings are resistant to most
solvents and acids, making them ideal for industrial
and commercial applications where corrosion is
prevalent. Using LINE-X greatly extends equipment
and vehicle life expectancy. It has a high "shore D"
hardness rating, offering excellent impact
resistance and superior tensile strengths (up to
6,600 psi) resulting in outstanding abrasion
resistance. Because the material is sprayed there is
a complete seal, making the coating "water tight".
Below is a list of our products ideal for
XS-100 is a user-friendly polyurethane and polyurea
formulation that has earned industry respect for its
durable, long-lasting, high-performance qualities
protecting truck beds across the globe. Perfect for
protecting your most valuable assets from abrasion,
corrosion and impact, XS-100 was designed with the
highest chemical equilibrium in its polymerization
network - softness vs. hardness, toughness vs.
longevity, durability vs. impact, etc.
Designed to provide non-skid properties and
protection against impact and abrasion in service
environments such as secondary containment and
industrial flooring, XS-130 is ideal where
elongation and flexibility are of utmost importance.
XS-310 is a pure polyurea coating with terrific
physical properties perfect for applications where
extreme impact and abrasion are of concern. XS-310
is very resistant to moisture and has a long cure
time, making it perfect for flooring and other
surfaces that need a smooth finish, where durability
is key, but chemical resistance is not top priority.
Like its sister product XS-310, XS-350 is a pure
polyurea coating with high performance physical
properties perfect for applications beset with
chemical damage or extreme impact and abrasion.
XS-350 is very insensitive to moisture and can be
seen widely used in the wastewater industry.
Any company looking for protection against abrasion
and impact, but also needing flame retardant
properties should look to XS-152. It has been tested
for flame spread and smoke density per ASTM E-84.
This product is ideal for the military and mining
XS-252 is accepted by the Mine, Safety and
Health Administration (MSHA) for use in the mining
industry for protection against abrasion, corrosion
and impact, as well as a non-strength enhancing mine
sealant. This revolutionary product, the only in its
industry, has exceptional flame retardant properties
that are ideal during the event of a fire and can be
applied to any type of underground equipment,
regardless of shape or size.
Applying to hard to reach areas and repairs is
easier than ever before with CS 400-750. Producing a
high-quality, durable, almost fluid formulation, CS
400-750 works perfectly for cracks, gouges and liner
damages. Some suggested applications include
troweling the base of custom showers, sealing
residential and commercial windows to prevent
leakage, repairing cracks in cement floors and
walls, etc. This product is also packaged as a
hand-held cartridge gun.
Perfect for patching, flooring, sealing,
troweling and more, CS 410-750 is packaged as a
hand-held cartridge gun and comes complete with
piston-rods and spray tip atomizer air regulators,
which allow the user to adjust the gun output as
well as the size of the spray fan. It is ideal for
fixing liner gauges and other small repairs, as well
as tricky applications where a traditional gun may
have difficulty accessing.
CU-400 is a castable formulation designed for
protection in severe service environments where
abrasion and impact are a top priority. This
scientifically-engineered, self leveling formulation
creates an extremely dense, high tensile and tear
strength lining that is durable and tough enough to
withstand high-volume, abrasive material flow, as
well as considerable impact. CU-400 can be used in
molds for any shape or size, and can be seen in a
variety of industrial and commercial industries,
including concrete, construction, manufacturing,
mining and more.
Our most popular OEM specified product, SE-210
provides high performance protection against
abrasion, corrosion and impact. SE-210 is ideal in a
variety of industries, including material handling,
transportation and more!
SE-500 is scientifically-engineered to
provide coating solutions for severe chemical
With its highly crossed-link formulation, SE-500 is
impervious to a wide variety of commercial and
industrial chemicals, including caustic and nitric
acids, automotive gasoline, aviation and diesel
fuel, kerosene and crude oil. Varied industry
applications include, but are not limited to
chemical processing plants, oil /gas containment,
plating, precious metal mining, primary/secondary
containment and wastewater.
One of the greatest threats from a ballistic
attack comes from spalling or explosion of metal
fragments. PAXCON-2100 can be sprayed over any
surface hard enough to cause a projectile to spall,
such as aluminum, ceramic or steel. PAXCON-2100 will
encapsulate bullets and other ballistic objects,
remaining in-tact, without posing further secondary
damage resulting from spalling and fragmentation.
Suggested applications include military vehicles,
breast plates, equipment, target systems and more!
Did you know in a typical bomb blast, the
majority of casualties come from building
fragmentation? With PAXCON-3350, pieces of walls,
equipment and other building debris flying at high
speeds will no longer result in extensive injury or
death. In fact, recent tests results show that a
wall coated with the PAXCON-3350 remained intact up
to a detonation equivalent of 1,000 pounds of TNT.
Some recent applications include the United States
Pentagon, government buildings, military bases and
vehicles, and international government facilities